TECK90 (XLPE) 1000 Volts -40°C Copper

Single Conductor

 

 

ASTM Class B stranded soft bare copper. In sizes 8 AWG to 1000 kcmil, the conductors are compact stranded to reduce cable diameter and weight. Insulation is cross-linked polyethylene XLPE, the most widely used polymeric material for insulating both low and high voltage cables. The insulated conductors in the unshielded TECK cables rated 5 KV or less meet the requirement of CSA for RW90 XLPE.

Packaging: Long length Reels, cut to length.

Construction & Technical Data

Connector Selection Chart

ECS
Catalogue
Number 		Conductor Bonding Conductor Insulation
(inches) 		Inner Jacket
(inches)

Approximate Diameters

Ampacity Total
Weight
(lbs/km)
No. AWG
Size 		Inner Jacket  Armour Outer Covering
TK06-01 1 6 8 .060 .030 .453 .693 .791 100 1,086
TK04-01 1 4 6 .060 .030 .497 .737 .835 135 1,404
TK03-01 1 3 6 .060 .030 .525 .765 .863 155 1,552
TK02-01 1 2 6 .060 .030 .555 .795 .893 180 1,732
TK01-01 1 1 4 .080 .045 .658 .898 .996 210 2,283
TK001-01 1 1/0 4 .080 .045 .725 .965 1.069 245 2,562
TK002-01 1 2/0 4 .080 .045 .750 1.025 1.135 285 3,097
TK003-01 1 3/0 3 .080 .045 .807 1.070 1.180 330 3,678
TK004-01 1 4/0 3 .080 .045 .859 1.134 1.244 385 4,173
TK250-01 1 250 2 .090 .060 .955 1.247 1.355 425 4,809
TK300-01 1 300 2 .090 .060 1.005 1.280 1.409 480 5,626
TK350-01 1 350 1 .090 .060 1.080 1.353 1.465 530 6,388
TK400-01 1 400 1 .090 .060 1.123 1.398 1.527 575 7,100
TK500-01 1 500 1/0 .090 .060 1.237 1.514 1.625 660 8,517
TK600-01 1 600 1/0 .090 .060 1.278 1.553 1.682 740 9,712
TK750-01 1 750 2/0 .090 .060 1.408 1.683 1.812 845 11,969
TK1000-01 1 1000 2/0 .090 .060 1.561 1.911 2.045 1000 15,335